Remote Light Switch – More Convenience

When using traditional light switch, most of people would complain that they have to get up to turn off the light every time when they intend to go sleep. This can be a real pain, especially for the wheel chair users or people with limited mobility.

Now a new and improved remote light switch allows you to control your lights wirelessly. This kind of switch is more beneficial than the traditional light switch and is especially useful for people with impaired mobility and other problems. It acts much like a remote controlled lighting fixture; controlled by a radio or other signal and does not require an operator to touch the switch. You simply install the switch to an overhead light and when you flip the switch, a small charge is produced by a miniscule generator. This charge is what actually powers the small control and sends out the signal that is received by your light fixture and the light is turned on/off. The remote switch uses batteries with a low and safe voltage; avoiding the risk of electric shock if a user touches a switch with wet hands, and allows switching apparatus from a location without a wired switch.

One additional benefit of remote switch for families with children is if your kids have trouble falling asleep and need a light on to feel comfortable, you can reduce your electricity usage by turning the lights off after they are asleep. A remote control light switch will allow you to do that without getting out of bed yourself, and without disturbing the children and waking them up.

However, the wireless switches are actually not intended to completely replace traditional wall switches. Although it would be an excellent idea in many homes, it still has some problems. The transmitter and receiver use a low-strength radio signal to communicate. Most devices are designed for use within a range of 100 feet. Metal barriers will distort radio waves and reduce this effective distance. In some models, if the signal weakens over time or stops working, you must change the batteries.

As a result, when you decide to use remote light switch, you should take these problems into consideration in addition to its benefits.

Find excellent remote light switch from http://www.ourautomation.com

广告

How to Choose a Remote Light Switch for Wall?

Since wall light switch is closely related with human security, consumers should choose high security switches. There are many different kinds to choose from, and some might suit your project better than others. Here are some advice to help you make the right decision.

Switch panel

Size of switch panel should be consistent with that of connection box. Remember to bear in mind that choosing switch panel which has smooth surface, visible brand identity, anti-fake label and safety certification mark. Flame retardation and soundness of switch material is necessary. Generally speaking, height of switch should be 1200~1350 mm, the distance along the door frame 150 to 200 mm, and height of outlet 200 to 300 mm.

Switch security

Internal wire connection plays a great role in switch’s security. At present the most advanced connection mode is speed terminal connection structure. It is very simple; all you need to do is to insert the wire into the terminal. There is no exposure to the live parts, so no electric shock in construction.

There are also switches specially designed for the kitchen, which installs the water splash box or plastic baffle on the panel. It is effective to prevent oil, steam intrusion, short circuits caused by moisture, and keep long life.

Pay attention when you buy switches:

  1. Appearance: pattern and color of switch should conform to the style of the room. For example, if the overall tone of room decoration is light colored, you should not choose black, brown or other dark switches.
  1. Hand feel: switches at high quality are made of the advanced materials such as polycarbonate. They are characterized by high fire resistance, moisture resistance and anti-collision. Fine switch requires smooth surface, no bubbles, no scratches, and no stains.
  1. Brand: to use switches of famous brands. The switch quality is the key for electrical appliances working normally. Switches from small manufacturers are very unreliable, which has short life span. But frequently change of switch is really troublesome. Most well-known brands make commitment to the consumers the switch “available for 15 years,” “guarantee working life of 12 years”, “continuous on/off 10,000 times”, etc.
  1. Mark: pay attention to the mark on the switches, including safety certification, the rated current and voltage.
  1. Packaging: there should be addresses and phone number

  http://www.ourautomation.com

Remote light switch for the Track

Remote Light Switch for the Track

   Remote light switch for the track in a long distance can easily be done by our new products
    This is a real case..
    Someone needs to set up remote light switch for the track and this would be done with wireless switching. Our new remote light switch products can help him to achieve this operation.
    He said that the signal needs to travel at least 3000 meters so the 5000m setup would be best. The wireless receivers will trigger emergency flashing beacons.The layout is for motorcycle oval track competition and the remote controller and wireless receivers need to be operated by officials to ensure the safety of all competitors. This remote light switch is done by operating warning revolving beacons. For this reason the customer need our best operating combinations over a distance of probably 4000 to 4500 meters with direct line of sight available to remote control light switch….so he gather the 5000m Long Distance combination (with separate antenna) would be the best option for the remote light switch.
12 volt equipment is being used for all emergency lighting via a 12 Volt DC power source.
filename-1
MP1,MP2,MP3 and MP4 are corner marshalling points and the remote controllers only need the ability to switch the corresponding relay for that corner (MP1 to L1, MP2 to L2, MP3 to L3 and MP4 to L4 yellow on diagram). There needs to be no interference between each of these MP points so they can be operated independently of each other. Therefore each MP remote controller only needs to be one (1) channel. 
The remote controller CC1 for the remote light control -Is the main central control for the marshalling and is operated by the steward of the event. The Steward will be mobile so this remote controller will not be at any fixed point. To enable the Steward to have total control and over-ride the operations of officials at all MP points this remote controller for the remote light switch will need to be of 6 Channel operation, one channel for each MP (yellow) point (channels 1 to 4) and one channel (number 5) to operate simultaneously all RED receivers on points L1, L2, L3 and L4. This is to enable the stoppage of a race at any time by switching to a “STOP” light at all these points. Button number 6 can be spare.
SG1 – Is for the operation of the starting mechanism for each race (which could be up to 100) during the event.
This remote controller for the remote light switch needs to be 2 Channel to enable the switching of 2 GREEN (GL1 and GL2) lights at the starting area from Channel 1 and Channel 2 will activate 2 solenoids (SR1 and SR2). Therefore the remote controller for the remote light switch needs to be 2 channel and SR1, SR2, GL1 and GL2 receivers all each need to be 1 channel. GL1 and GL2 have to operate simultaneously from Channel 1 and SR1 and SR2 have to work simultaneously from Channel 2.
    According to all the information he has mentioned above, we recommend him a series of long distance wireless remote control kits to remote light switch. The theoretical working distance of the remote light switch can reach about 5000m.
2345_image_file_copy_6
These remote light switch kits have feedback function and two ways working mode.
With the feedback function, they can let the user know whether he/she had already connected the remote controller and wireless receiver for the remote light switch successfully in such a long distance.
Two ways working mode: When the wireless receiver for the remote light switch gets the signal of remote controller, it will immediately send a return signal to the remote controller. When the remote controller  receives the feedback signal of the wireless receiver for the remotte light switch, the remote controller for the remote light switch will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.
The wireless receiver for the remote light switch is waterproof case with waterproof connectors. The wireless receiver for the remote light switch can be installed outdoors. They are also high power remote light switch control kits, each relay output can work at maximum current 30A.
External magnetic sucker antenna with 5meters cable, the antenna for the remote light switch can be installed outside the building to get better working distance
The remote light switch kits can be used to remote light switch, agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.

How CanWe Get the Longest Distance by Using Wireless Receiver and Remote Controller?

Generally speaking, remote light switch kit consists of wireless receiver and remote controller. You can control almost all the equipments by using the remote light switch kit. Setting the wireless receiver on the equipments, using the remote controller to transmit RF signal to the wireless receiver. When the wireless receiver gets the RF signal, it can control the equipments.
Some customers will find that the actual distance is not so long in real practice. In this case, you may doubt that the products are of poor quality or the working distance is wrong. That is not true. Here we want to recommend that all the working distance of our remote light switch products is a theoretical data, it shall be operated in an open ground, no barriers, no any interference.
Take remote light switch model 0020144(S1M-DC12-ANT2 & CB-1) as an example, the distance 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, the remote light switch mode 0020114 will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 2000m.
The working distance of the remote controller for the remote light switch refers to the sensitivity of the wireless receiver when it receiving the signal and the capacity of the remote controller. The sensitivity of the wireless receiver for the remote light switch depends on the antenna.
So, if you want to have the longest distance, you may first choose a high power remote controller. When you want to control the devices outside the house or from a far distance, it is better to choose remote controller with external antenna.
Trees, water, cement or other constructions will all reduce the signal of the remote controller. You may set the wireless receiver on a higher place to get a better signal.
How to get the longest distance of the remote controller for the remote light :
First, choose the suitable remote light switch kits and its accessories to get a longest distance.
(1)Transmitter: you can choose a high power transmitter to get a longest distance.
There are some examples:
Model Working Distance Size
CP-2 500m (theoretical) 135mm x 42mm x25mm
CB-2 1000m (theoretical) 135mm x 42mm x25mm
CC-2 5000m (theoretical) 135mm x 42mm x 25mm
e r
t
(2)Wireless receiver: Normally, almost all the wireless receiver consists of their own internal antenna. You’d better choose the wireless receiver with external antenna. External antennas consist of magnetic sucker antenna (longer distance) and telescopic antenna (middle distance). According to the environment, choose the suitable external antenna for your receiver so that it can get a longest distance.
There are some examples:
q w 1 1_08
Tips:
a) Stand the antenna on end;
b) Completely stretch the antenna.
By doing this, you can get a better signal, therefore, you can get a longest distance.
(3)The external antenna can be set on both receiver and transmitter.
Second, operate the remote light switch kit in a right way to make sure that you can get a longest distance.
  • The battery power of transmitter must be adequate and the battery voltage must higher than the theoretical level. For example, the battery voltage of transmitter is 12V, when the battery power is adequate, the voltage will higher than 12V, may be 12.1V or 12.2V.
  • The battery voltage of receiver must be adequate and must be within the working range. Using regulated power supply and choosing the good quality power adapter. If the receiver is using the storage battery, then the battery capacity must be high.
  • Don’t put the receiver in a metal box, because the signal weakens greatly by the metal. The solution is set an external magnetic sucker antenna outside the metal box.
  • When the wireless receiver cannot receive the RF signal from the remote controller, which means the working distance of the remote light switch may not reach the theoretical data. Then you can choose a signal repeater model 0010001(R-01) to solve this problem.
Apart from the above information we have mentioned, there is another important news we want to show you.
In the past, we only have CB series remote controller for the remote light switch, which working distance is 1000m. Now, we have CC series remote light switch for the remote light switch, its theoretical working distance can reach about 5000m, which is much longer than 1000m.
We also produce a new series of remote light switch kits. The working distance is 5000m.
These remote remote light switch kits have feedback function and two ways working mode.
With the feedback function, the remote light switch kits can let the user know whether he/she had already connected the remote controller and wireless receiver successfully in such a long distance.
Here is the principle of the feedback function for this remot light switch kit.
[Remote Controller]   <———
|                         \
[Encode]                       \
|                            |
[Channel]                [Feedback]
|                            |
[Decode]                       /
|                          /
[Wireless Receiver]     ———->
Two ways working mode of the remote light switch: When the wireless receiver gets the signal from remote controller, it will immediately send a return signal to the remote controller. When the remote controller receives the feedback signal from the wireless receiver, the remote controller will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.
The wireless wireless for the remote light switch is waterproof case with waterproof connectors. The wireless receiver can be installed outdoors. They are also high power remote light switch kits, each relay output can work at maximum current 30A.
External magnetic sucker antenna for the remote light switch with 5meters cable, the antenna can be installed outside the building to get better working distance
The remote light switch kits can be used in agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
There are some examples:
Remote Light Switch for motor boat
t01dda278368155b465
Remote Light Switch for the hunting pitfall
330693037
Remote Light Switch for the movement of the target in the shooting gallery
phuket-shooting-range-3-500x333
Remote Light Switch for the vending machine
minibank
Remote Light Switch for the LED of the business signs
Big_screen_led_display_billboard_advertising_board
You can view  http://www.ourautomation.com/-c-505.html  to choose the wireless remote control kit.

Two-way Long Range Remote Light Switch at the Restaurant

We are looking for a remote light switch kit to remote control light through a hallway at a restaurant. It is meant to signal the server that food is ready in the kitchen. We are looking at the Long Range 2000M 1 CH Momentary Remote light switch kit. This looks like a reliable solution but I have a question… Is there any way of knowing if the light attached the wireless receiver is actually turned on without seeing it. I realize the bulb may blow now and then, but on the whole they need to be sure in the kitchen when they signal the server the light is actually on. We look forward to this solving our problem with one of your remote light switch products.

We recommend this customer to choose remote light switch model: 0020104 (S1PUW-DC12-ANT2 & CC-2 or CC-1). According to his description, he wants a remote light switch kit that has two-way function or feedback function. This remote light switch model is definitely suitable for him to remote control light at his restaurant.

2345_image_file_copy_6

The long range remote light switch kit has feedback function which can let the user know whether he/she had already connected the remote controller and wireless receiver successfully in such a long distance. Two ways working mode, when the wireless receiver gets the signal of remote controller, it will immediately send a return signal to the remote controller.

The remote light switch kit can be used to control both DC0~28V and AC110~240V equipments.

Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals A and B are Normally Open; Terminals A and C are Normally Closed.

If you want to remote control a DC12V light with the remote light switch, do as following:

1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.

2) Connect Terminal A to the positive pole of the light, connect Terminal B to the positive pole of the power supply, and connect both light and power supply’s negative pole.

If you want to remote control an AC220V light, do as following:

1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.

2) Connect Terminal A to the light, connect Terminal B to the live wire of the power supply, and connect light and power supply’s neutral wire.

By using this long range remote light switch kit to remote control light, the server of the restaurant can easily know whether the food is ready or not in the kitchen. This will bring a lot of convenience for all the members of the restaurant. In addition, such method may let the customers feel more satisfied because it will shorten their time for waiting their food.

If you have the similar problem like this customer, or in other words, if you want to remote control light, you can enter into our website to choose the remote control kit you like.

Online shop: http://www.ourautomation.com.

2000-5000M Remote Light Switch for CFL Bulb

Whether you’re reading in the comfort of your bed or setting just the right mood for watching a movie, remote light switch means never having to get up out of your favorite chair to switch ON/OFF your CFL bulb. If you want a remote light switch product to control one(multiple) CFL bulb(s) in a super long range, but still worry about that you may don’t know if the CFL bulb attached the wireless receiver is actually on/off in such a long distance .

We think remote light switch 0020114 (S1PXW-DC12-ANT2 & CC-2) may the choice for you. Because the remote light switch 0020114 can reach 2000, 3000m, 4000m or 5000m in different circumstances. With two-way feedback function, the CFL Bulb will turn on/off when you press on the button of the remote controller. And when the CFL Bulb is on/off, the wireless receiver will immediately send a return signal to the remote controller. After the remote controller receives the feedback signal, it will exude a buzzing sound like “D~” which means CFL Bulb has been turned on/off successfully. The two-way feedback function of remote light switch can make the user know whether ha/she has turned on/off CFL Bulb in such a long distance.

2000-5000M Remote Light Switch for CFL Bulb

Here is the wiring for a DC CFL bulb with the remote light switch 0020114.

Let’s see the material preparation:

1 x wireless receiver S1PXW-DC12V-ANT2

1 x remote controller CC-2

1 x DC 12V power adapter

1 x DC CFL bulb

2000-5000M Remote Light Switch for CFL Bulb

Neutral wire and live wire from the DC CFL bulb should be respectively connected to Terminal “A”Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.

2000-5000M Remote Light Switch for CFL Bulb

Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.

Control mode Latched:

Press the big button on the remote controller-> CFL bulb is on;

Press the small button on the remote controller -> CFL bulb is off.

Pair the remote controller to the wireless receiver:

Press button K1 of wireless receiver for 1- 2 seconds; signal LED on the wireless receiver is on. Thewireless receiver enters into status of LEARNING.

Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.

2000-5000M Remote Light Switch for CFL Bulb

Press the big button on the remote controller, the CFL bulb is on.

2000-5000M Remote Light Switch for CFL Bulb

Press the small button on the remote controller, the CFL bulb is off.

2000-5000M Remote Light Switch for CFL Bulb

If you are intereated in our remote light switch products, please enter into the site:

http://www.ourautomation.com

2000-5000M Remote Light Switch for Light Bar

Whether you’re reading in the comfort of your bed or setting just the right mood for watching a movie, remote light switch means never having to get up out of your favorite chair to switch ON/OFF your CFL bulb. If you want a remote light switch product to control one(multiple) light bar(s) in a super long range, but still worry about that you may don’t know if the light bar attached the wireless receiver is actually on/off in such a long distance .

We think remote light switch 0020114 (S1PXW-DC12-ANT2 & CC-2) may the choice for you. Because the remote light switch 0020114 can reach 2000, 3000m, 4000m or 5000m in different circumstances. With two-way feedback function, the light bar will turn on/off when you press on the button of the remote controller. And when the light bar is on/off, the wireless receiver will immediately send a return signal to the remote controller. After the remote controller receives the feedback signal, it will exude a buzzing sound like “D~” which means light bar has been turned on/off successfully. The two-way feedback function of remote light switch can make the user know whether ha/she has turned on/off light bar in such a long distance.

QQ图片20150827151517

Here is the wiring for a light bar with the remote light switch 0020114.

Let’s see the material preparation:

1 x wireless receiver S1PXW-DC12V-ANT2

1 x remote controller CC-2

1 x DC 12V power adapter

1 x DC light bar

QQ图片20150827152522

Neutral wire and live wire from the light bar should be respectively connected to Terminal “A” Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.

QQ图片201508271537158.26_5

Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.

Control mode Latched:

Press the big button on the remote controller-> light bar is on;

Press the small button on the remote controller -> light bar is off.

Pair the remote controller to the wireless receiver:

Press button K1 of wireless receiver for 1- 2 seconds; signal LED on the wireless receiver is on. The wireless receiver enters into status of LEARNING.

Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.

QQ图片20150827154316

Press the big button on the remote controller, the light bar is on.

QQ图片20150827145918

Press the small button on the remote controller, the light bar is off.
QQ图片20150827145432

If you are intereated in our remote light switch products, please enter into the site:

http://www.ourautomation.com